JYMPU-316water-based polyurethane mortar putty series

This product adopts the advanced domestic bio-based synthesis technology and castor oil modified polyol emulsion. It has unique high performance and is particularly suitable for use in extreme industrial environments such as food hygiene, chemical corrosion, high-temperature and humid heat, water immersion and slippage, low-temperature freezing, heavy load and strong impact. It has low VOC, is non-toxic and odorless, and complies with strict health and hygiene standards. This product has a high solid content, is tough and has good bonding strength, and has excellent anti-debonding and anti-cracking properties. It is recommended for use in the intermediate coat of the water-based polyurethane mortar flat scraping process. Depending on the ground strength and environmental temperature, it can be flexibly combined with MDI curing agent, fine aggregate, and an appropriate amount of color paste (see reference ratio). The construction process is simple, the construction performance is excellent, it cures quickly, and the construction temperature range is wide (0-35℃).

Notes:

1. The rapid stirring time after mixing all components should not be less than 40 seconds.
2. The mixed material should be used up within 15 minutes.
3. If the material sticks to the scraper during the scraping process and its volume increases by more than 30%, discard the material, stop using it, and re-prepare the ingredients to continue using fresh materials.
4. Abnormal ingredients, such as increased viscosity during stirring, material heating, are prohibited from use.
5. It is recommended that the fine aggregate usage range be 5-6 kilograms. This should be adjusted according to actual application.
6. This group of materials is only for use in the batch scraping process and should not be used for self-flowing surface layers.